Produse pentru sursa de iluminare (9)

High UV irradiance combined with a uniform irradiated area is the key feature of the surface LED series SFL-UV. The SFL-UV modules are water-cooled high-power UV LED sources with an intelligent LED driver. The absence of ineffective infrared radiation reduces the heat compared to conventional UV lamps. Three standard sizes are available with light-emitting areas of 100 x 100 mm to 200 x 200 mm. Customized sizes are available on request. Independent of size, we offer two versions. The HO versions reach high irradiance of up to 5500 mW/cm², while the ECO versions still offer up to 2000 mW/cm². Both irradiances are measured at a distance of 10 mm to the emitting window. The high irradiance allows extremely short processing times. Wavelengths of 365, 385, 395, 405, and 450 nm are available for many different applications. Wavelength:365, 385, 395, 405 or 450 nm Connections:Trigger in, dimming in (0-10V) Programming, optional:RS485, RS232 or USB Internal security circuit:Over-temperature, LED N.C. Optical feedback, opt.:internal and external sensor

The HP-120i is a high-intensity short arc light source for quick UV spot curing within seconds. As a microprocessor controlled spotlight source with light guide, HP-120i is a reliable and economical „cold“ light source for irradiation with high-intensity UV-A radiation and blue light. The heat transfer in the material is minimized due to the absence of ineffective red and near-infrared radiation. The spotlight source uses fiber-optic cables in various configurations for flexible irradiation of one to four points. Depending on the light guide, UV-A irradiances of up to 15,000 mW/cm² can be achieved. The exposure time can be set through a digital timer with a resolution of 0.1 s. The shutter can also be switched by a foot switch or via a PLC system controller by an external contact. The typical lamp life is 2,000 hours. To achieve uniform irradiation, the lamp power is stabilized. Lamp lifetime:2000 h (typical) Dimensions:305 mm x 358 mm x 145 mm Weight:~ 8,2 kg Mains:110 - 230 VAC, 50/60 Hz Operation temperature:5 to 40 °C

The very high irradiances of up to 39,000 mW/cm² and the compact dimensions characterize the UV-LED Spots and allow extremely short process times. For this purpose, the UV-LED is focused at the desired working distance. The UV-LED Spot P is suitable for automated and manual bonding. For applications such as bonding, potting or fluorescence excitation, the wavelengths 365, 385, 395, 405 and 450 nm are available. With the variety of wavelengths as well as the exchangeable optics, you remain particularly flexible and can upgrade and change over at any time. For controlling the UV-LED Spot P, we offer the LedControl S as a table top device or the LedControl DC for DIN rail mounting. With the LedControl S and DC UV LED controllers, the ultraviolet LED output can be set between 2% and 100%. Wavelength:365, 385, 395, 405 o. 450 nm Dimensions, Spot P:Ø 15 x 143 mm Dimensions, Spot P short:Ø 15 x 60 mm Cable length:1,5 m Weight:~130 g

The high-performance UV LED Solo P combines a compact, variable, and economic point light source for manual bonds in an ergonomic design. The UV LED Solo P requires no external control and can be operated directly with a mains power adapter. As all UV LEDs the Solo P is quickly switchable. WAVELENGTH, BEAM PROFILE, AND OPTIC The wavelengths of 365, 385, 395, 405, and 450 nm are available for different applications. In addition, several beam profiles with interchangeable optics are available. The UV radiation of high-power LED is focused in the desired working distance. The high irradiance of 24,000 mW/cm ² allows for short processing times. APPLICATIONS OF HIGH-POWER UV-LED SOLO P UV curing and bonding and UV sealing Micro curing Irradiation of biological samples Hairline or leak detection using fluorescence markers Wavelength:365, 385, 395, 405 or 450 nm Max. irradiance:> 24000 mW/cm² Dimensions:Ø 15 x 143 mm Weight:~130 g Operating voltage:100 - 240 V, 50/60 Hz

The handheld UV lamps are high-powered UV radiation sources for UV-A and UV-C radiation. They enable the sensitive detection of luminescent substances through their high irradiance. The handheld UV lamps are available in three versions. UV-A and UV-C lamps are equipped with two UV lamps to obtain a very high intensity of irradiation on the sample. The UV-A/C handheld lamp allows the simultaneous or separate application of UV-A and UV-C radiation with the same device. All handheld UV lamps are mains operated and have VIS filters, which effectively filter the visible light from the tubes. Thus, even weak luminescence in the sample can be optimally detected. We recommend our additional stand to create a table lamp and have both hands free for testing. HIGHLIGHTS OF UV HAND-HELD LAMPS High irradiance of ~ 500 µW/cm² in a distance of 10 cm Filters for visible light from the tubes Weak luminescence can be detected Long lifetime Optional: Switchable UVA and UVC emission Wavelength:254 nm or 365 nm Max. irradiance:500 µW/cm² in Dimensions:280 x 86 x 65 mm Weight:~1400 g Mains:230 VAC / 50 Hz

We offer LED technologies for existing applications. With our modular concept, combined with our calibration laboratory and in-house production we offer decisive development advantages. POSSIBLE REASONS FOR CUSOMIZED UV-LED: The system already exists. Standard products can’t be installed due to limited space. Irradiation from one direction is not sufficient The determination of irradiation wavelength has not yet taken place You are looking for a competent and independent partner YOUR ADVANTAGES WITH OPSYTEC UV-LED CUSTOMIZED SOLUTION: Development and production from a single source Ideal for small batches, tests and prototypes Wavelength 275 nm, 365 nm, 385 nm, 395 nm and 405 nm available Further wavelengths are possible Suitable sensor? We offer customer-specific solutions, too Reliable results through our own calibration laboratory Special solutions are beneficial - even for small quantities. Ask us!

With the UV LED series L, we combine the benefits of the UV LEDS compared to the UV lamps; these are initial start, dimmability, long service life and a lower heat input with an economical UV LED system. Irradiances of up to 5,5 W/cm² are reached on the surface. The high irradiance enables short processing times. For different applications, wavelengths of 365nm, 385 nm, 395 nm, 405 nm, and 450 nm are available. That way, the UV LED series L can be optimal customized for the requirements of the photoinitiator. All wavelengths are available in five differently sized illumination areas from 10 x 100 mm, and 30 x 30 mm up to 200 x 100 mm. Customized versions are available too. Wavelength:365, 385, 395, 405, 450 nm Connections:Trigger, Interlock in Programming, optional:RS485, RS232 or USB Internal security circuit:Over-temperature, LED defect Cable length:3 m, up to 10 m (opt.)

The use of ultraviolet-curing adhesives and compounds is constantly increasing. With the LedControl S UV LED controller, you remain flexible for future requirements. Due to the modular design, one UV LED lamp, up to five or even up to 16 UV LED lamps with different wavelengths can be operated and individually adjusted with one LEDControl S. For applications such as bonding, potting or fluorescence excitation, the wavelengths 365, 385, 395, 405 and 450 nm are available. With the variety of wavelengths, you remain particularly flexible and can upgrade and change over at any time. With several UV LED lamps, the irradiation can also be ideally homogenized to achieve the best possible uniformity. With the intelligent UV LED control, the power of the ultraviolet LED lamps can be individually adjusted between 2% and 100%. A timer for irradiation times between 0.01 s and 9999 s is already integrated. Dimensions:185 x 251 x 100 mm (S) Operating temperature:5 to 40 °C Storage temperature:-10 to 60 °C Humidity:< 80%, non-condensing Mains:100 - 240 V, 50/60 Hz

In order to design machines safely and to meet the requirements of the Machinery Directive 2006/42/EC, safety functions are required in the control systems. Typically, the required Performance Level PLr is determined for each safety function. This is where the first difficulty begins during the planning and commissioning of UV systems, namely determining the severity of the injury, the frequency and duration of exposure, and how to avoid the uv hazard. In the short term, UV exposure of the skin leads to erythema, elastosis and/or skin cancer. In contrast, UV exposure of the eye can lead to photokeratitis, conjunctivitis and cataractogenesis. If e.g. skin cancer is considered, it is a severe, usually irreversible injury. In this context, Directive 2006/25/EC „Artificial Optical Radiation“ allows regular exposure up to a daily exposure limit of 30 J/m². Mounting type:DIN rail Dimensions, approx.:10,5 x 7,0 x 21,5 cm Cooling:passive Operating temperature:5 to 40 °C Storage temperature:-10 to 60 °C